[联系方式]地址：广东东莞中国.东莞市寮步镇石步管理区8栋1F（华南工业园红绿灯路口）
电话：0769-83525809
传真：0769-83262805
联系人：胡生　　先生　　工程师
手机：13553899129
Http://www.gdjyep.com
E-mail:husong196@163.com

东莞惠州河源污水处理设备
污水处理（Sewage treatment）说明：
1 (Foods waste water) 食品废水
Food industry wastewater is characterized by organic matter and suspended solids content was high, easy to corruption. Generally should adopt the biological treatment.
食品工业废水的特点是有机物质和悬浮物含量高，易腐败。一般均宜采用生物处理。
2 (Domestic sewage) 生活污水
The waste water which produced in the course of human life is one of the main water sources of pollution. Domestic sewage contains a large number of organic matter, pathogens, viruses, salts, etc.
人类生活过程中产生的污水,水体的主要染污源之一。生活污水中含有大量有机物，病原菌、病毒，无机盐类等。
3 (Printing and dyeing waste water) 印染废水
The waste water of Printing and dyeing are more, mainly divides into the cotton dyeing & finishing, the chemical fiber fabric dyeing & finishing, the dye printing, the wool spinning dyeing & finishing(contains wool dyeing) and so on.
印染废水种类较多，主要分为棉布染整，化纤织物染整，印花、毛纺染整（含羊毛染色）等。
4 (Wool scouring waste water dealing with)洗毛废水处理
The CODcr of sewage density is quite high in the single pure wool scouring factory, which may reach about 20,000~60,000mg/l, and is the difficulty in the waste water. The large-scale woolen mill has the washing yarn and dyeing line, if mixed the wool washing waste water into the dyeing waste water directly, that the process will increase the difficulty to reach the sign also.
单纯洗毛厂的污水浓度CODcr比较高，可达20000~60000mg/l左右，是废水处理中的难点。大型毛纺厂有洗毛线和染色线，如果直接把洗毛废水、染色废水混合处理，亦会给达标增加难度。
5 (Steel waste water) 钢铁废水
In the metallurgy profession, small steel plant waste water pollution, which mainly has the acid and alkali waste water, the waste water of containing oil, the emulsion waste water, recalculated cooling water and the desalinization water treatment and some domestic waste water.
冶金行业中小钢铁废水污染，一般主要有酸碱废水、含油废水、乳化液废水、循环冷却水处理和脱盐水处理及部分生活污水。
6 (Plating and painting waste water) 电镀、涂装废水
Plating, painting craft utilizes extremely widely in the metal surface treatment, in the production that basically has the waste water coming into being, and the waste water assumes acidity also includes many kinds of metallic ion and nonmetallic ion, some kind of which is poison, so must pass through processing that can reach the standard to discharge.
电镀、涂装工艺在金属表面处理中运用极其广泛，在生产过程中基本上都有废水产生，废水中呈酸性且含有多种金属离子和非金属离子，其中有些为一类毒物，必须经处理达标后排放。
7 (The organic waste water of high concentration) 高浓度有机废水
In present, the disposal of the organic waste water of high concentration is a difficult problem in the environmental protection, in the common industry such as monosodium glutamate sewage, the production of citric acid and cane sugar as well as the wool scouring industry all has this kind of sewage, and certain drugs manufacture and chemical industry production also have this kind of sewage.
高浓度有机废水是目前环保处理中的一道难题，常见的产业中味精污水、柠檬酸生产、蔗糖生产以及洗毛业都有这种污水，以及某些制药化工生产行业都有这类污水。