深圳派克工业阀门有限公司
首 页   公司简介   产品展示   商务信息   人才招聘   联系方式
[联系方式]
地址:广东深圳龙华新区墩背工业区18号
电话:0138-27443669
传真:0755-81708778
联系人:林工  先生  经理
手机:13827443669
Http://www.gdparker.com
E-mail:307161059@qq.com
进口耐高压电磁阀 进口耐高压电磁阀

 


进口耐高压电磁阀
德国雷普LIP耐高压电磁阀由中国深圳派克阀门有限公司总代理
德国雷普LIP阀门在全球市场质量最认可阀门品牌之一

德国雷普LIP进口高温电磁阀、进口高压电磁阀、进口低温电磁阀、进口高压防爆电磁阀、进口防腐电磁阀、进口高压蒸汽电磁阀、进口不锈钢高压电磁阀、进口高压内螺纹电磁阀、进口水用电磁阀
德国雷普LIP进口高压电磁阀应用范围:广泛应用在航天、船舶重工、石油化工、给排水、消防设备、食品医疗设备、清洗设备、景观喷灌、加湿设备、液压设备、测试设备、水厂等,工作压力在6.4---100MPa的管道系统中。
德国雷普LIP进口高压电磁阀产品特点:阀芯均为不锈钢活塞式,活塞环不会被介质中的杂质卡死,动密封性能高,寿命长;活塞与金属阀腔不产生直接摩擦,阀体安装向无限制;专制线圈,不易烧毁;长时间停止动作重新启动,动作同样灵敏;最低启动工作压力0.5MPa。
德国雷普LIP高压电磁阀主要技术参数:
产品规格:DN0.5DN200
阀体材质:不锈钢
适用介质:水、气、油、蒸汽、燃气、腐蚀流体等
温度范围:-100+200
介质粘度:小于50C St(大于时需定制)
防护性能:防水、防爆(Exd IICT5)、防腐
接线方式:接线座式;引线式;插头式
控制方式:常开、常闭
电源电压:DC12127V; AC36380V
连接方式:内螺纹、法兰(外螺纹和特殊接口可定做或加转接头)The United States and Europe OKE imported high temperature solenoid valve, high pressure, low temperature solenoid valve solenoid valve, inlet high-pressure explosion-proof solenoid valve, solenoid valve, the import of imported high pressure steam solenoid valve, stainless steel high pressure solenoid valve, electromagnetic valve, inlet high-pressure internal thread imported water solenoid valve

德国雷普LIP进口高压电磁阀应用范围:广泛应用在航天、船舶重工、石油化工、给排水、消防设备、食品医疗设备、清洗设备、景观喷灌、加湿设备、液压设备、测试设备、水厂等,工作压力在6.4---100MPa的管道系统中。

The United States and Europe OKE imported high pressure solenoid valve application scope: widely used in aerospace, shipbuilding heavy industry, petrochemical industry, water supply and drainage, fire fighting equipment, food, medical equipment, cleaning equipment, landscape irrigation, humidifying equipment, hydraulic equipment, test equipment, water, the working pressure in the pipeline system in 6.4---100MPa.

美国欧可OKE进口高压电磁阀产品特点:阀芯均为不锈钢活塞式,活塞环不会被介质中的杂质卡死,动密封性能高,寿命长;活塞与金属阀腔不产生直接摩擦,阀体安装向无限制;专制线圈,不易烧毁;长时间停止动作重新启动,动作同样灵敏;最低启动工作压力0.5MPa。

The United States and Europe OKE characteristics of imported high pressure electromagnetic valve: valve products are stainless steel piston, piston ring is not the impurities in the medium card dead animals, high sealing performance, long service life; the piston and the metal valve cavity produces no direct friction, the valve installed without restriction; autocratic coil, is not easy to be burned; long time stop restart also, the action sensitivity; minimum starting pressure of 0.5MPa.

进口高压电磁阀主要技术参数:

The main technical parameters of imported high pressure solenoid valve:

产品规格:DN0.5DN200

Product specifications: DN0.5DN200

阀体材质:不锈钢

Body material: stainless steel

适用介质:水、气、油、蒸汽、燃气、腐蚀流体等

Suitable medium: water, oil, gas, steam, gas, corrosive fluid

温度范围:-100+200

Temperature range: -100+200

介质粘度:小于50C St(大于时需定制)

The viscosity of the medium: less than 50C St (more than required custom)

防护性能:防水、防爆(Exd IICT5)、防腐

Protection performance: waterproof, explosion-proof, anti-corrosion (Exd IICT5)

接线方式:接线座式;引线式;插头式

Connection: connection seat type; lead; plug

控制方式:常开、常闭

Control mode: normally open, normally closed

电源电压:DC12127V; AC36380V

The power supply voltage: DC12127V; AC36380V

连接方式:内螺纹、法兰(外螺纹和特殊接口可定做或加转接头

Connection: thread, flange (outside screw and special interface can be customize
品牌:德国雷普LIP
产地:德国

 

深圳派克工业阀门有限公司    版权所有
© 2000-2020 Power by:环保设备网